The modular dual line system consists of two main parts;
the Base and the Metering Valves.
Bases and Metering Valves are made in stainless steel
AISI 316 or in zinc plated steel and are available with
nlets and outlets in UNI -ISO 7/1 (BSP) or NPTF threads.
The Metering Valves can be supplied with adjustable
or ixed discharge. The Valves with adjustable discharge
are fitted with turrets provided with integral adjusting
screws together with a metacrylate cover and seal.
A blanking plate to be ordered separately, can be provided
on the Base to accommodate future additional points.
The advantages of the Modular
Dual Line System are:
• Versatility in
lubrication layout planning.
• Flexibility to expand or reduce the number of
elements to meet changing requirements.
• Reduced spare parts, fewer parts in stock = lower
inventory costs.
• Blanking plates can be provided to accommodate
future requirements.
• Save on labour and piping costs; the Metering
Valves can be serviced without disturbing the assembly
or existing pipework.
• Lower maintenance costs; the modular concept
provides lower cost replacement components.
Specification:
Temperature
range:
-30oC to +80oC
Frequency:
100 cycles/minute.
Max. pressure
(inlet):
400 bar
Lubricant:
Oil:
15 cSt to 1000
cSt.
Grease:
NLGI 00 to
NLGI 3.
Base threads:
Inlets:
3/8”
BSP or 3/8” NPTF.
Outlets:
¼”
BSP or ¼” NPTF.
Installation/Operation:
The Base:
A modular base is made up of
a minimum of three elements: inlet; intermediate
and end.
Key to Base Part Numbers.
Metering Valves:
Item
Description
Part No.
Zinc
St.Steel.
1
Screw
14090
675231
2
Screw
14095
675238
3
Thread
insert
1523343
675217
4
‘O’
Ring (Viton)
18880
18880
5
Plug
BSP
926001
519061
5
Plug
NPTF
850304
519071
6
Check
valve BSP
92313
519990
6
Check
valve NPTF
92340
519901
7
Plug
BSP
926002
519062
7
Plug
NPTF
850305
519072
Base
BSP
NPTF
Inlet
(zinc)
675311
675321
Intermediate
(zinc) for valve: DMM-DM-DMMF -DMF - DMG-DMG1-DMG1-DMGF - DMGF1-DMGF2.
675312
675314
675322
675324
End
(zinc)
675313
675323
Inlet
(stainless)
675011
675071
Intermediate
(stainless) for valve: DMMX-DMX-DMMXF-DMXF-DMGX-DMGX1-DMGX2-DMGXF
-DMGXF1-DMGXF2
675012
675014
675072
675074
End
(stainless)
675013
675073
Each element is made of zinc or
stainless steel and is available with UNI -ISO 7/1 (BSP
-DIN) or NPTF threads.
This concept can be extended to include up to 20 or more
sections in a common assembly and eliminate the need for
costly pipe and tubing connections.
The Base specified will accommodate its specific Metering
Valves.
(Values in parenthesis are for fixed discharge).
Dimension ‘A’ is obtained by adding t o the dimensions
of the Base Inlet and Base End 43,8 mm. (1.725”) the
following values for each Intermediate Base
Spares:
ORDERING INFORMATION:
MLP-Mobile lube pump
ELECTRIC GREASE PUMP FOR MOBILE
Applications:
The MLP Electric Grease Lubrication Pump is particularly
suited to Mobile lubrication applications where outdoor
installation is necessary.
It can be fitted with up to 3 pump outlets and used
with progressive divider systems to construct a fully
automatic mobile lubrication system.
The unit has a choice of three sizes of reservoir and
can incorporate a Cycle-Dwell/Cycle or Dwell-Sensor
Timer ! (Dwell-sensor will stop the pump after reading
a cycle from a progressive distributor valve)
